建材灌裝機

設備特征：
       1.本機采用可編程控制器（PLC)、高速工控組態軟件進行實時監控的控制，使用調節方便。
       2.每個灌裝頭都有稱重和反饋系統，能對每個頭的灌裝量進行灌裝量設置和單個微量調整。
       3.光電傳感器、接近開關等都是先進的傳感元件，做到無桶不灌裝、 堵桶主機會自動停機并報警。
       4.灌裝方式為下潛式，可有效減少泡沫的產生，可以滿足不同特性物料的灌裝。
       5.整機按GMP標準要求制作，各管路連接采用快裝方式，拆卸清洗方便，與物料接觸部位及外露部位均采用優質不銹鋼制造。整機安全、環保、安全、美觀、能適應各種不同環境工作。

Equipment features：
       1. This machine adopts PLC, high speed software to implement real time control, easy to use and adjust.
       2.Each filling head has a weighing and feedback system which can set the filling amount of each head and achieves fine tune.
       3.Photoelectric sensor, proximity switch and so on are advanced sensor components, including realizing no pail no filling, the filling system will pause automatically and send an alarming signal when there is pail jam.
       4. The diving filling can effectively reduce the foam and fulfill different meterials which has different characteristics.
       5. GMP standard, stainless steel structure, environmental protection, safety and good looking, it's suitable for different working environment and all pipe connections are covnenient to dismantle and clean.

設備參數：
Equipment parameters：

設備型號Model	MCYT-CZ-8T	MCYT-CZ-6T	MCYT-CZ-4T	MCYT-CZ-2T
頭數 Head option	8	6	4	2
適用瓶型 Applicable bottle Type（mm）	L:160～360, W:100～300, H:250～500 Φ:≥40
生產能力Capacity (bottle/h)	30kg:600瓶/小	30kg:520瓶/小時	30kg:450瓶/小時	30kg:240瓶/小時
灌裝范圍Filling deviation range(g)	≤±0.3	≤±0.3	≤±0.3	≤±0.3
設備尺寸	4500×1700×2300	3500×1700×2300	2500×1700×2300	1500×1700×2300